Stone Dust for Pathways in Cheltenham, MD

Maryland Rock Supply handles gravel and aggregate delivery in Cheltenham, MD for two kinds of buyers: contractors who need the right base on a schedule, and homeowners fixing one path or one drive. Both usually start with CR-6. This part of Prince George's County sits on Top Soil up top and slow clay down low, so drainage choices matter as much as the stone itself.

Materials for Cheltenham Projects

Paths and walkways are where most Cheltenham orders start, and the fines are what make a path walkable. Stone dust is the local name for screenings, and it packs into a firm, smooth surface that holds an edge better than loose gravel. Use it for stone dust bedding under flagstone and pavers, and for path surfacing where you want a surface you can push a wheelbarrow across.

Under that surface you still need a base that compacts. CR-6 is the standard Maryland base, a blend of crushed stone down to dust, and it links to CR-6. Crusher Run is a separate product on the site, and crush and run works where you want the same binding blend with slightly different gradation. Order Crusher Run for drives and pads, and CR-6 where the spec calls it out.

For the finish layer on a path, a smaller chip reads better underfoot. Natural Pea Gravel, also called pea stone, links to Natural Pea Gravel and suits walkways, play areas and the strip around downspouts. Walkway Gravel is the other option when you want a finer, walkable surface over a compacted base: see Walkway Gravel. For drainage beside a path, washed #57 Stone is the usual choice.

Ground and Conditions in Cheltenham

The failure mode here is a thin base over wet clay. Cheltenham sits on the Western Shore Coastal Plain, where the ground is unconsolidated sand, silt, clay and gravel rather than bedrock. Higher ground drains well; low spots hold water. A path or drive built with a thin layer of stone over soft clay ruts the first wet spring, no matter how good the stone is.

The fix is depth and separation. Dig out the soft material, put down a thick compacted lift of CR-6, then cap it with stone dust or Natural Pea Gravel. Frost depth in Prince George's County is 30 inches, and repeated freeze-thaw heaves a thin base hardest over wet clay. Low sites near the shore also stay too wet to compact after storms, so spring through late fall is the reliable window.

Water is the other half of the job. Summer thunderstorms, nor'easters and tropical rain soak the ground, and flat land near the Bay and tidal rivers sheds it slowly. Waves and storm tides wear at shorelines and bluffs, and runoff cuts gullies across sandy slopes. Where a path crosses that runoff, a washed stone drainage layer such as #57 stone or Drain Rock moves water instead of trapping it. Within 1,000 feet of tidal water, Critical Area rules limit lot coverage, and gravel and stone surfaces count toward it, so plan the footprint before you order.

Delivery to Cheltenham and the Surrounding Area

Order online and pick your quantity in tons or cubic yards. A ton is weight, a yard is volume, and the two do not swap evenly across materials because stone, sand and topsoil differ in density. For a path, measure length by width by depth in feet, divide by 27 for yards, then check the product page for the conversion that fits that material.

Bulk delivery to a Cheltenham site means a truck that needs a clear, firm approach and a spot to dump. We also cover the rest of Prince George's County, including Bowie, Clinton, College Park, Laurel and Suitland. Put the drop point where you want the pile, since moving stone twice is the expensive part of any path project.

Estimate Your Quantity, Then Place the Order

Measure your path, drive or bed, run the numbers on the calculator, and let it convert tons to yards for the material you chose. Maryland Rock Supply delivers CR-6, stone dust, Natural Pea Gravel and washed stone across Cheltenham and Prince George's County. Send your measurements and we will get your order on the schedule.