Skip to main content
FREE Delivery!|(301) 719-3485

Montgomery County, Maryland ยท Free Delivery

Large River Rock and Bulk Aggregates for Kensington, MD

Free delivery to Kensington on every order, with loads arriving in as fast as 2 business days.

Delivering to Kensington, MD

Free delivery on every order.

  • Free delivery to Kensington
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Kensington

Crushed gravel and base materials that compact under tires.

CR-6

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Kensington

Rock & Stone delivered to Kensington

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Kensington

Decorative delivered to Kensington

Rounded stone for beds, borders and water features.

Sand delivered to Kensington

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Kensington

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Kensington

How delivery to Kensington works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Kensington.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Kensington addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Maryland Rock Supply delivers gravel and aggregate delivery in Kensington, MD for driveways, drainage and planting work. CR-6 is the base material most crews here ask for, a compacting blend of crushed stone down to dust. Kensington sits on rolling Piedmont ground, where silty soil turns soft when it stays wet.

Coarse stone holds slopes, swales and stream banks in place around Kensington, and finer materials take over on paths and beds.

Materials for Kensington Projects

Storm runoff moves fast here. It scours bare banks, cuts under drive edges and leaves ruts where water sits. Coarse, open-graded stone is the fix, and the size you pick depends on how much water and energy the spot has to handle.

Start with rip rap where a slope drops toward a stream valley or a swale carries runoff off the lot. Large river rock works the same job in dry creek beds, and it reads better than plain rip rap in a planted yard.

Below that, #4 crushed stone or #57 Stone handles heavy drainage, French drains and driveway topping, and #57 stone is also the usual concrete aggregate. For finer work, #8 crushed stone sets paver joints and small-chip surfacing.

Base layers come next. CR-6 is the standard compacting base for a Kensington drive, and crusher run is a separate product where you want a binding blend. Stone dust, listed here as screenings, beds pavers and flagstone. On top, Natural Pea Gravel suits walkways and play areas, and Top Soil rebuilds grade after grading before seed or sod goes down.

Ground and Conditions in Kensington

Base, driveway and paver work runs spring through late fall. Mid-winter freezes and wet spells stop compaction, but for shorter stretches than crews see farther west in the mountains.

Winter still brings regular freeze-thaw cycles, with a frost depth of 30 inches in most county codes across this zone. A drive built on a thin base or on wet, silty soil heaves and ruts when that cycle repeats.

So the base depth and the drainage layer matter more here than the top dressing does. Give the drive a crown, plus a ditch or drain where water collects, and compact CR-6 in lifts rather than one deep pass. If grading leaves bare, sloping ground, arm it with rip rap or river rock before the next storm season.

Delivery to Kensington and the Surrounding Area

Order online and choose your quantity by the ton or by the cubic yard. Bulk delivery to a Kensington site means a truck placing material where the driver can reach it, so mark the drop spot and clear the approach before the truck arrives.

Coverage reaches the rest of Montgomery County, including Germantown, Silver Spring, Gaithersburg, Rockville and Bethesda. Lead time depends on material and on the route, so plan a delivery around your grading and compaction schedule rather than after it.

Order Bulk Stone and Aggregates in Kensington

Maryland Rock Supply serves Kensington and the rest of Montgomery County with bulk gravel, stone, sand and soil delivery. Pick the material, size the quantity with the calculator, and order online when you are ready. We will get your load out to the site and on the ground.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Kensington, MD

What stone should I use for drainage in Kensington?

Match the stone to the water. Use #57 stone or #4 crushed stone in French drains and trench bottoms, where open voids let water move. Use rip rap or large river rock on stream banks, culvert outlets and steep slopes that take storm runoff. For pipe bedding and tight spots, drop to #8 crushed stone or drain rock.

What should I have ready when the truck arrives?

Have the drop area clear and marked, with a firm, level spot the truck can reach without crossing soft ground. Keep gates open, move parked cars, and know where the material is going before it lands. If the load is for a base, have your plate compactor and rake on site so you can spread and compact it the same day.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.