Skip to main content
FREE Delivery!|(301) 719-3485

Worcester County, Maryland ยท Free Delivery

Large River Rock and Bulk Aggregates for Newark, MD

Free delivery to Newark on every order, with loads arriving in as fast as 2 business days.

Delivering to Newark, MD

Free delivery on every order.

  • Free delivery to Newark
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Newark

Crushed gravel and base materials that compact under tires.

CR-6

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Newark

Rock & Stone delivered to Newark

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Newark

Decorative delivered to Newark

Rounded stone for beds, borders and water features.

Sand delivered to Newark

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Newark

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Newark works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Newark.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Newark addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Flat ground and a high water table make drainage the first problem on most lots around Newark. Gravel and aggregate delivery in Newark, MD starts with the right base, and that usually means CR-6. Maryland Rock Supply stocks CR-6, washed stone and coarse rock for driveways, drainage and shoreline work across Worcester County.

Along the tidal rivers and coastal bays, storm surge and rising water eat at banks and marsh edge. Coarse stone is the answer there, and it is the answer for swales and slopes inland too.

Materials for Newark Projects

Start coarse. Big stone holds a bank or a swale in place, and smaller stone handles the water that reaches it. Work down the sizes until you reach the base and bedding materials.

Rip rap is the heavy end. Line a bank or a swale with it and waves and runoff hit stone instead of bare soil. Railroad ballast works the same way where you need hard standing or severe drainage, and #4 crushed stone sits under it for trench bottoms and entrances.

For the drainage layer itself, use #57 stone in French drains and foundation drains. Drain rock covers drywells and downspout runs. If you want a slightly smaller washed stone, #67 stone does the same work at a tighter size, and #8 crushed stone fits paver joints and small-chip surfacing.

CR-6 is the base that ties it together. It compacts into a hard, binding layer under a drive or a parking pad, and it is the material Maryland yards quote by name. Crusher Run is a separate product on the site and does similar work where you want a compacting blend. Top any base with driveway gravel or walkway gravel, and bed pavers on stone dust or concrete sand.

For planting, screened topsoil rebuilds grade after construction, garden soil fills raised beds, and shredded mulch holds moisture through hot, humid summers. Natural Pea Gravel and river rock finish walkways, beds and dry creek beds.

Ground and Conditions in Newark

Base and driveway work runs spring through late fall here. Freeze stoppages are shorter than inland, but saturated ground after winter and spring storms is the more common reason to wait.

The ground is Top Soil, silt and clay Coastal Plain sediment with few rocks. Higher ground drains well. Flat, low ground stays wet, and a base laid over wet, silty ground is the one most likely to heave when freeze-thaw returns.

So build up. Excavate until you are on firm ground, then bring in CR-6 in lifts and compact each one. Set the finished grade above the wet layer so water sheds instead of sitting under the stone. Frost depth is set by each county, so check the local figure before you set base depth.

Near tidal water, Critical Area rules limit lot coverage, and gravel and stone surfaces count toward it. Plan the footprint before you order, because a driveway or pad that pushes you over the limit is a problem you cannot fix after delivery.

Delivery to Newark and the Surrounding Area

Order online and choose your material by the ton or the cubic yard. Bulk delivery to a site in Newark arrives on a dump truck and is tailgated or dumped where you point it.

Newark sits in Worcester County, and deliveries cover the county, including Ocean City, Berlin, Pocomoke City, Snow Hill and Bishopville. Lead time depends on material and truck availability, so order ahead when a pour or an inspection is on the calendar.

Have the drop spot clear and reachable. A full truck needs room to turn and a firm surface to stand on, and soft ground after rain is the usual reason a delivery has to be rescheduled.

Questions About Stone and Delivery in Newark

What stone should I use for drainage in Newark?

Match the stone to the job. Use #57 stone for French drains, foundation drains and driveway topping, and #4 crushed stone or railroad ballast for heavy drainage and trench bottoms. Rip rap armors banks, swales and culvert outlets against wave action and storm runoff. Set any drainage layer over a compacted CR-6 base so it sits above the wet ground.

What should I have ready when the truck arrives?

Clear the drop spot and make sure the truck can reach it. Mark the area with stakes or paint so the driver knows where to dump, and keep vehicles and equipment out of the way. Point out any overhead wires, septic lids or soft spots before the bed goes up. If the ground is saturated, wait for it to firm up.

Order Bulk Stone and Aggregate in Newark

Maryland Rock Supply delivers bulk gravel, stone, sand and soil across Newark and Worcester County. Pick your material, set the quantity, and place the order online. Coarse stone for banks and swales, CR-6 for the base under it, and the finishes on top are all in stock and ready to ship to your site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Newark, MD

What stone should I use for drainage in Newark?

Match the stone to the job. Use #57 stone for French drains, foundation drains and driveway topping, and #4 crushed stone or railroad ballast for heavy drainage and trench bottoms. Rip rap armors banks, swales and culvert outlets against wave action and storm runoff. Set any drainage layer over a compacted CR-6 base so it sits above the wet ground.

What should I have ready when the truck arrives?

Clear the drop spot and make sure the truck can reach it. Mark the area with stakes or paint so the driver knows where to dump, and keep vehicles and equipment out of the way. Point out any overhead wires, septic lids or soft spots before the bed goes up. If the ground is saturated, wait for it to firm up.

What access does the truck need at my Newark address?

A clear, level spot the truck can reach and tip in, with nothing parked in the way and no low branches or wires over the approach. If the drop is behind a gate, tell us the width when you order. Soft ground after rain is the usual reason a delivery in Newark has to be moved, so point out anywhere the truck should not drive.