Skip to main content
FREE Delivery!|(301) 719-3485

Baltimore County, Maryland ยท Free Delivery

Large River Rock, Stone and Soil Delivery in Pikesville, MD

Free delivery to Pikesville on every order, with loads arriving in as fast as 2 business days.

Delivering to Pikesville, MD

Free delivery on every order.

  • Free delivery to Pikesville
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Pikesville

Crushed gravel and base materials that compact under tires.

CR-6

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Pikesville

Rock & Stone delivered to Pikesville

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Pikesville

Decorative delivered to Pikesville

Rounded stone for beds, borders and water features.

Sand delivered to Pikesville

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Pikesville

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Pikesville

How delivery to Pikesville works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Pikesville.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Pikesville addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Storm runoff moves fast here. Rolling slopes push water toward stream valleys, and silty ground turns soft when it stays wet. Maryland Rock Supply delivers gravel and aggregate delivery in Pikesville, MD to hold those slopes in place. Start with CR-6 for base, then armor the edges with coarse stone.

That mix of base and armor is what keeps a drive or bank from washing out after a summer storm.

Materials for Pikesville Projects

Slope, swale and bank protection starts with size. Coarse stone locks together and slows water. Fine stone beds pipe and pavers. Order by size, coarsest first.

Rip rap is the heavy answer for a bank that keeps cutting. It is coarse enough to stay put when water hits it, and it breaks the energy before it reaches bare soil. Use it at culvert outlets and anywhere a slope drops toward a stream.

Large river rock works the same way in a dry creek bed. Set it in a swale and it carries runoff instead of letting it sheet across a lawn. Round stone moves less than flat stone under fast water.

#4 crushed stone handles trench bottoms and heavy drainage. #57 stone is the standard for French drains and driveway topping, and #8 crushed stone fills the fine end for joints and tight bedding. For drive base, CR-6 is the Maryland standard, a compacting blend of crushed stone down to dust. Stone dust, also called Screenings, beds pavers and flagstone.

Round out a project with River Rock for decorative beds, Washed Sand for bedding under pavers, and Top Soil to rebuild grade after grading.

Ground and Conditions in Pikesville

Plan the work around the season. Base, driveway and paver work runs spring through late fall. Mid-winter freezes and wet spells stop compaction for shorter stretches than in Western Maryland, but they still stop it.

The soil here is loam, silt loam and clay loam weathered from schist, gneiss and other hard crystalline rock. It is often flaky with mica and carries rock fragments. Silt turns soft and hard to compact when saturated, so a drive needs a crown, ditch or drain where water collects.

Frost depth runs 30 inches in most county codes across this zone. Regular freeze-thaw cycles heave and rut drives built on a thin base or on wet, silty soil. Build the base thick enough to shed water and compact it in lifts.

Erosion shows up after summer thunderstorms and tropical storm rain. Stream banks scour and bare, sloping ground washes during grading. Arm the bank before the rain, not after.

Delivery to Pikesville and the Surrounding Area

Order online and pick your material by the ton or the yard. Bulk delivery covers Pikesville and the rest of Baltimore County, including Dundalk, Towson, Catonsville, Essex and Randallstown.

Lead time depends on material and route, so confirm your date when you order. Have the drop spot clear and reachable before the truck arrives.

Order Stone and Soil for Pikesville

Maryland Rock Supply delivers CR-6, rip rap, river rock, sand and soil across Pikesville and Baltimore County. Pick your material, choose your quantity, and place the order online. We will get the load to your site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Pikesville, MD

What stone should I use for drainage in Pikesville?

Use #57 stone for French drains and driveway topping, and #4 crushed stone for trench bottoms and heavy flow. For a bank or swale, rip rap and large river rock slow fast runoff. Fine drainage and pipe bedding take #8 crushed stone. Match the size to the water you expect.

What should I have ready when the truck arrives?

Clear the drop spot and keep it reachable. Mark anything the truck could hit, and know where you want the pile set. If the ground is soft from rain, pick a firm spot so the load does not sink. Have someone on site to direct the driver.

Do you deliver outside Pikesville itself?

Yes. We deliver across Maryland, and the surrounding towns and rural addresses around Pikesville are covered the same way as addresses in town. If you are not sure whether your address is reachable, send it over and we will confirm before you order.