Skip to main content
FREE Delivery!|(301) 719-3485

Charles County, Maryland ยท Free Delivery

Bulk Gravel Delivery to Port Tobacco, MD

Free delivery to Port Tobacco on every order, with loads arriving in as fast as 2 business days.

Delivering to Port Tobacco, MD

Free delivery on every order.

  • Free delivery to Port Tobacco
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Port Tobacco

Crushed gravel and base materials that compact under tires.

CR-6

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Port Tobacco

Rock & Stone delivered to Port Tobacco

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Port Tobacco

Decorative delivered to Port Tobacco

Rounded stone for beds, borders and water features.

Sand delivered to Port Tobacco

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Port Tobacco

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Port Tobacco

How delivery to Port Tobacco works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Port Tobacco.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Port Tobacco addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Maryland Rock Supply handles gravel and aggregate delivery in Port Tobacco, MD. Base, driveway and paver work runs spring through late fall here, with only short winter stoppages for frozen ground. CR-6 is the base most crews in Charles County order. Low sites near the tidal rivers can stay too wet to compact after a storm, so timing matters as much as the material.

Plan the delivery around your pour or paver date, not the other way around. Order once the subgrade is ready to take stone.

Materials for Port Tobacco Projects

Around Port Tobacco, the layers under flatwork decide whether it stays flat. A paver patio or walkway needs a bedding layer that drains and locks, plus a base that will not pump when the ground stays wet. Start with the bedding, then build down.

Screenings, which local yards call stone dust, is the standard bedding for pavers, flagstone and patio work. It compacts to a tight, level surface and holds joint sand in place. For a setting bed under slabs and pavers, Washed Sand is the cleaner choice, and Mason Sand covers brick and block work plus paver joints.

Under all of that goes the base. CR-6 is the Maryland base material, a compacting blend of crushed stone down to dust. It is what you want under a patio, a parking pad or a shed base. Crusher Run is a separate product and does similar work where a binding blend is wanted.

Drainage and finish materials round out most orders. #57 Stone handles French drains and driveway topping. #8 Crushed Stone fills paver joints and fine drainage. 3/8" Natural Pea Gravel, or Natural Pea Gravel, suits walkways and play areas.

Ground and Conditions in Port Tobacco

Charles County sits on unconsolidated layers of sand, silt, clay and gravel, not weathered bedrock. Higher ground drains well. Low spots hold water, and that is where thin bases fail first.

The failure shows up as ruts, pumping and settled pavers after a wet stretch. A thin base over clay will not bridge that. The fix is depth and compaction: excavate deeper, place CR-6 in lifts, and compact each lift before the next one goes down.

Frost depth in Charles County is 24 inches, so a thin base heaves and ruts through repeated freeze-thaw, most of all over wet clay. Summer thunderstorms, nor'easters and tropical rain soak the ground, and flat land near the Bay and tidal rivers sheds water slowly. Within 1,000 feet of tidal water, Critical Area rules limit lot coverage, and gravel and stone surfaces count toward it. That is one more reason to get the base and drainage right the first time.

Delivery to Port Tobacco and the Surrounding Area

Order online and choose your quantity by the ton or by the cubic yard. Tons are the safer unit for stone, since a yard of CR-6 weighs more than a yard of mulch. Work out volume first, then convert.

To estimate, multiply length by width by depth in feet, then divide by 27 for cubic yards. For a patio base, use the compacted depth you actually need, not the loose depth. A solid, thick base is a reasonable starting point over clay, and a thin layer is enough for bedding.

Bulk delivery drops the load where the truck can reach, so flag any low wires, soft ground or tight gates when you order. We deliver across Port Tobacco and Charles County, including Waldorf, La Plata, Bryans Road, Indian Head and Hughesville.

Order Your Base and Bedding Material

Run your numbers through the calculator before you order, then pick the material that matches your base and bedding depths. CR-6, screenings, washed sand and the rest of the list are ready to go out by the ton. Place your order online and we will deliver it to your Port Tobacco site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Port Tobacco, MD

What gravel is best for a driveway in Port Tobacco?

CR-6 is the standard choice for a Charles County driveway. It is a compacting blend of crushed stone down to dust, so it binds and holds a crown instead of rolling under tires. Place it in lifts and compact each one. Top it with #57 stone or driveway gravel if you want a cleaner surface.

How much material will my project need?

Measure the area, decide the compacted depth, and convert to cubic yards. A thick patio base over clay needs more stone than the same area with a thin layer. Order by the ton for stone and by the yard for sand and soil. If you are unsure, size up slightly and keep the extra for touch-ups.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.