Crushed Stone, Sand and Gravel in Severn, MD

Spring through late fall is the working season for gravel and aggregate delivery in Severn, MD. Base, driveway and paver work runs in that window, with only short stoppages when the ground freezes. Maryland Rock Supply stocks CR-6, the standard Maryland base material, along with the stone, sand and soil that go over and around it.

Severn sits on the Western Shore Coastal Plain, where the ground is unconsolidated sand, silt, clay and gravel rather than bedrock. That matters for how deep you build a base and how well it drains.

Materials for Severn Projects

Driveways and parking pads are the bulk of what leaves the yard here. CR-6 is the blend most Maryland contractors ask for first: crushed stone down to dust that compacts into a tight, binding surface. It carries a driveway, a shed base or the sub-base under pavers. The same material is specified on state work as a graded aggregate base, but on a Severn driveway it is just CR-6.

Use it as a solid layer over firm ground for a drive, and a thicker one where the subgrade is soft clay. CR-6 is listed on the site under its Maryland name.

If you want a second option for the same job, Crusher Run is a separate product. It is a compacting crush and run blend for drives and base where you want the stone and dust to bind together the same way.

On top of a compacted base, the choice is about how the surface sheds water. Driveway Gravel tops an existing drive or a finished base. #57 Stone handles drainage, French drains, driveway topping and concrete aggregate. Smaller washed stone suits tighter work: #8 Crushed Stone for paver joints, small-chip surfacing and fine drainage, and #89 Crushed Stone for joints and tight bedding.

Sand and soil finish the job. Maryland yards call fine bedding stone dust, also known as Screenings. Washed Sand beds and levels under pavers and slabs and mixes into concrete. Top Soil rebuilds grade for lawns and beds once the stone work is done.

Ground and Conditions in Severn

Start with where the water goes. Summer thunderstorms, nor'easters and tropical storm rain soak this ground fast, and low, flat land near the Bay and tidal rivers sheds it slowly. Unconsolidated sand, silt, clay and gravel sit under most lots here, ranging from well drained Top Soil on higher ground to slow-draining clay in the low spots.

That mix drives base decisions. A thin base over wet clay heaves and ruts through repeated freeze-thaw, even in a mild winter. Anne Arundel County sets frost depth at 30 inches, so a driveway that holds up needs a compacted base deep enough to bridge that movement and a drainage layer that moves water out instead of holding it.

On the water side, waves and storm tides wear away shorelines and bluffs, and runoff crossing sandy slopes cuts gullies. RipRap armors that ground against wave action and storm runoff. Within 1,000 feet of tidal water, Critical Area rules limit lot coverage, and gravel and stone surfaces count toward it, so plan the footprint before you order.

Delivery to Severn and the Surrounding Area

Bulk material arrives by the truckload and is dumped where you want it, so the drop site needs room and a clear path. Have the pile location marked before the truck arrives, and keep overhead wires, parked cars and soft ground out of the way. Material is sold by the ton or by the yard, and the quantity you need follows from the area and the depth you are building to.

Order online and pick the material, the quantity and the delivery spot. Maryland Rock Supply delivers across Severn and Anne Arundel County, including Glen Burnie, Odenton, Annapolis, Severna Park and Pasadena. If you are unsure between two sizes, describe the project and the site conditions and the right material can be matched to it.

Questions from Severn Buyers

Do you supply contractors working in Severn?

Yes. Contractors, builders and homeowners all order from the same yard, and bulk delivery works for both. If you are building drives, pads or paver sub-base on a schedule, plan the drop around the spring through late fall window when base work runs cleanly. Low sites near the shore can stay too wet to compact after storms, so timing the delivery around the weather saves a wasted load.

Do you deliver CR-6 to Severn, MD?

Yes. CR-6 is delivered in bulk to Severn and the rest of Anne Arundel County, sold by the ton. It is the standard Maryland base material for driveways, parking pads, shed bases and paver sub-base. Give the area and the depth you are building to, and the quantity can be worked out before the truck is loaded.

Order Base, Stone and Soil for Your Severn Project

Maryland Rock Supply supplies CR-6, crusher run, washed stone, sand, topsoil and decorative rock for driveways, parking pads, paver sub-base, drainage and shoreline work across Severn and Anne Arundel County. Order online and set up delivery to your site. Choose your material and quantity, and the load will be on its way.