#57 Stone and Bulk Aggregates for Trappe, MD

Flat, low ground and a high water table slow drainage after heavy rain in Trappe. That is why gravel and aggregate delivery in Trappe, MD starts with washed stone. Maryland Rock Supply stocks CR-6 for bases, plus the clean stone that moves water away from your house.

Water is the problem here. Stone is the fix. Order by the ton and we haul it to your site in Talbot County.

Materials for Trappe Projects

Washed stone does the drainage work on the Eastern Shore. It has no fines to hold water, so it stays open and lets rain pass through. Here is what we stock, coarsest to finest.

Start a French drain with #57 Stone. It is the washed size most crews around Trappe reach for. Pack the trench, set the pipe, then cap it with the same stone so water keeps moving.

For a drywell or a downspout run, #4 Crushed Stone gives you open voids that hold volume fast. Tighten the top with #67 Stone or #8 Crushed Stone so the surface stays walkable.

Under all of it sits CR-6, the Maryland base material. It is a compacting blend of crushed stone down to dust, and it locks up hard once you wet and roll it. Put it on a driveway, a parking pad or a shed base, then top it with clean stone if you want a drier surface.

Need bedding for pavers or a patio? Use Screenings, which most yards here call stone dust. It packs flat and holds a level grade.

Ground and Conditions in Trappe

Base and driveway work runs spring through late fall here. Freeze stoppages are shorter than inland, so the calendar is friendlier. Saturated ground after winter and spring storms is the more common reason to wait.

That matters because the ground under Trappe is Top Soil, silt and clay Coastal Plain sediment. Higher ground drains well. Flat, low land stays wet, and tidal marsh lines many shorelines.

A base laid over wet, silty ground is the most likely to heave when freeze-thaw returns. So dig out the soft spots, build up with CR-6, and compact in lifts. Keep the finished grade above the wet layer instead of working it in.

Within 1,000 feet of tidal water, Critical Area rules limit lot coverage, and gravel and stone surfaces count toward it. Plan your pad and drive with that in mind before you order.

Delivery to Trappe and the Surrounding Area

Maryland Rock Supply delivers bulk material across Talbot County. That covers Trappe, plus Easton, St. Michaels, Oxford, Cordova and Bozman. Order online and pick your material, then set the quantity by the ton or by the cubic yard.

Not sure how much you need? Measure the area, decide the depth, and let the tonnage follow. A driveway base usually wants a thick layer after compaction, and a drainage trench fills faster than you expect.

Lead time depends on the material and the week. We confirm your window when the order comes in. Have the drop spot clear and reachable so the truck can tailgate or dump where you want the pile.

Questions About Gravel in Trappe

Do you deliver CR-6 to Trappe, MD?

Yes. Maryland Rock Supply delivers CR-6 to Trappe and the rest of Talbot County, including Easton, St. Michaels, Oxford, Cordova and Bozman. Order it online by the ton and we bring it to your site. CR-6 is the standard Maryland base material, so it works for driveways, parking pads, shed bases and paver sub-base.

What gravel is best for a driveway in Trappe?

Start with CR-6. It compacts into a hard, binding base that stands up to wet, silty ground. Then top it with #57 Stone or 3/4 inch crushed stone for a cleaner, better-draining surface. If you want a finer, more walkable drive, finish with 3/8 inch crushed stone over the compacted base.

Order Bulk Stone for Your Trappe Project

Maryland Rock Supply delivers CR-6, washed stone, sand and topsoil to Trappe and the surrounding Talbot County area. Pick your material, set the tonnage, and we handle the haul. Order online when you are ready to build.