Skip to main content
FREE Delivery!|(301) 719-3485

Montgomery County, Maryland ยท Free Delivery

Bulk Gravel Delivery to Burtonsville, MD

Free delivery to Burtonsville on every order, with loads arriving in as fast as 2 business days.

Delivering to Burtonsville, MD

Free delivery on every order.

  • Free delivery to Burtonsville
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Burtonsville

Crushed gravel and base materials that compact under tires.

CR-6

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Burtonsville

Rock & Stone delivered to Burtonsville

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Burtonsville

Decorative delivered to Burtonsville

Rounded stone for beds, borders and water features.

Sand delivered to Burtonsville

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Burtonsville

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Burtonsville

How delivery to Burtonsville works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Burtonsville.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Burtonsville addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Order gravel and aggregate delivery in Burtonsville, MD by the ton or the yard. Maryland Rock Supply drops bulk loads across Montgomery County. Start with CR-6, the standard Maryland base material. Then add the fines and washed stone your project needs. The ground here is loam, silt loam and clay loam over schist and gneiss, so plan your base and drainage before the first load lands.

Materials for Burtonsville Projects

A Burtonsville walkway holds together only when the fines on top bind. Build the base compact, then cap it with a material that drains and stays put. Stone dust, also called screenings, is the Maryland name for paver, flagstone and patio bedding. It locks tight and finishes smooth. Order it as Screenings.

For a garden path, use Walkway Gravel. It walks easier than loose stone and holds its shape. Set edging first so the edges do not spread.

CR-6, also called CR6, is the standard Maryland base under all of it. It is crushed stone blended down to dust, so it compacts into a hard, binding layer. Use it for driveways, parking pads, shed bases and paver sub-base. Order it as CR-6.

Want a walkable, decorative cap? Natural Pea Gravel, also called pea stone, suits walkways, patios and play areas. It drains fast and feels good underfoot. Order it as 3/8" Natural Pea Gravel.

Tie your drainage together with #57 stone, also called 57 stone. It handles French drains, driveway topping and concrete aggregate. Order it as #57 Stone.

Ground and Conditions in Burtonsville

A thin base is the failure you see first here. Rolling slopes shed storm runoff fast, and silty soil turns soft and hard to compact once saturated. A drive built thin ruts, pumps and heaves through winter freeze-thaw. Frost depth runs 30 inches in most county codes across this zone.

Fix it before the stone goes down. Crown the drive, cut a ditch, or add a drain where water collects. Compact the subgrade, then build your CR-6 in lifts until the whole layer is tight. Give paths a thin, even layer of fines over a compacted base.

Time the work. Base, driveway and paver projects run spring through late fall. Mid-winter freezes and wet spells stop compaction for shorter stretches here than in Western Maryland. Bare, sloping ground also washes during grading and after summer storms, so stabilize slopes early.

Delivery to Burtonsville and the Surrounding Area

Choose your unit first. Order by the ton for base, stone and sand; order by the yard for soil, fill and mulch. Measure length times width times depth in feet, then divide by 27 for cubic yards. For tons, your stone supplier converts by material weight.

Estimate a little over on base material. It settles under compaction, and a short load stops the job. Order online, and we deliver across Burtonsville and Montgomery County, including Germantown, Silver Spring, Gaithersburg, Rockville and Bethesda.

Pick a drop spot the truck can reach. Bulk loads need firm, level ground and clear overhead space. Spot it close to the work so you move material once, not twice.

Questions Burtonsville Buyers Ask

What should I have ready when the truck arrives?

Clear the drop spot and mark it. Keep cars, kids and pets back while the bed tilts. Bulk loads need firm, level ground that will not sink under weight, plus clear overhead lines. Point out the exact spot before the driver starts. Have your shovel and wheelbarrow ready, then spread the pile the same day.

What is the best base under pavers in Burtonsville?

CR-6. It is the standard Maryland base material, a compacting blend of crushed stone down to dust that locks into a hard, stable layer. Compact it in lifts over a crowned, well-drained subgrade, then bed the pavers on stone dust. On this zone's silty, mica-flaky soil, that combination handles freeze-thaw better than a thin or open base.

Order Your Load for Burtonsville

Run your numbers through the calculator, then decide between tons and yards. Add a little extra base for compaction. Maryland Rock Supply delivers CR-6, stone dust, Natural Pea Gravel and #57 stone across Burtonsville and Montgomery County. Measure, pick your materials, and place the order online. We will get your load on the road.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Burtonsville, MD

What should I have ready when the truck arrives?

Clear the drop spot and mark it. Keep cars, kids and pets back while the bed tilts. Bulk loads need firm, level ground that will not sink under weight, plus clear overhead lines. Point out the exact spot before the driver starts. Have your shovel and wheelbarrow ready, then spread the pile the same day.

What is the best base under pavers in Burtonsville?

CR-6. It is the standard Maryland base material, a compacting blend of crushed stone down to dust that locks into a hard, stable layer. Compact it in lifts over a crowned, well-drained subgrade, then bed the pavers on stone dust. On this zone's silty, mica-flaky soil, that combination handles freeze-thaw better than a thin or open base.

Where will the material be placed?

Wherever you tell us, as long as the truck can safely reach it. Mark the spot before the delivery and someone should be on site to point the driver to it. If nobody can be there, leave clear instructions when you order and we will follow them.