Skip to main content
FREE Delivery!|(301) 719-3485

Prince Georges County, Maryland ยท Free Delivery

Mason Sand for Patios in Laurel, MD

Free delivery to Laurel on every order, with loads arriving in as fast as 2 business days.

Delivering to Laurel, MD

Free delivery on every order.

  • Free delivery to Laurel
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Laurel

Crushed gravel and base materials that compact under tires.

CR-6

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Laurel

Rock & Stone delivered to Laurel

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Laurel

Decorative delivered to Laurel

Rounded stone for beds, borders and water features.

Sand delivered to Laurel

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Laurel

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Laurel works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Laurel.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Laurel addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Maryland Rock Supply stocks gravel and aggregate delivery in Laurel, MD, from CR-6 base to mason sand and stone dust. Prince George's County ground runs from Top Soil on higher lots to slow clay in low spots, so the bedding under your pavers matters as much as the pavers.

Patio and flatwork projects in Laurel come down to choosing the right materials, knowing how the ground behaves, and planning the delivery.

Materials for Laurel Projects

On Laurel patios, the bedding layer keeps pavers and slabs level. You set a compacted base, then a thin, even bedding course, then the paver or slab. Get the bedding wrong and the surface rocks underfoot within a season.

Washed Sand, which local yards call concrete sand, is the standard bedding for pavers and slabs. It screeds flat, compacts without holding water, and locks the units in place.

Screenings, or stone dust, is the Maryland choice when you want a tighter, firmer bed. It binds hard under flagstone and patio pavers and resists washing out at the edges.

Mason Sand serves brick and block work, paver joints, and play areas. It packs into joints cleanly and stays put once it is swept in.

Washed Sand is a coarse sand and fine gravel blend for leveling and bedding where you want more bite than plain sand gives you.

Under all of it goes the base. CR-6 is the Maryland standard, a compacting blend of crushed stone down to dust. Crusher Run is listed as a separate product for drives and pads that want the same binding action.

Ground and Conditions in Laurel

Around Laurel, trouble usually begins with a base laid too thin. Patios over clay settle, heave at the edges, and shed water into the wrong place. On sandy higher ground the same patio holds, which is why two jobs a mile apart can need different depths.

Western Shore Coastal Plain ground is unconsolidated sand, silt, clay and gravel, not bedrock. Low, flat spots drain slowly, and summer thunderstorms and nor'easters soak them further. A wet subgrade cannot be compacted, so a low, soggy spot may need to dry before you build.

Frost depth in Prince George's County is set at 30 inches. Milder winters do not cancel repeated freeze-thaw, which ruts a thin base most of all over wet clay. Excavate deeper, compact CR-6 in lifts, and your patio stays flat.

Base and paver work runs spring through late fall, with short stoppages for frozen ground. Within 1,000 feet of tidal water, Critical Area rules limit lot coverage, and gravel and stone surfaces count toward it. Plan the footprint before you order.

Delivery to Laurel and the Surrounding Area

Order online and choose your quantity by the ton or by the cubic yard. Yards are easier to picture, tons are easier to price, and the conversion depends on the material and how wet it is.

Measure the area, decide your depth, and multiply. A patio base measured over a known square footage gives you a volume, and the calculator turns that into tons or yards for each product. The calculator on each product page does that step for you.

Bulk delivery drops where the truck can reach, so tell us about soft ground, slopes, or a narrow drive when you order. We deliver across Laurel and Prince George's County, including Bowie, Clinton, College Park, Suitland and Fort Washington.

Questions Laurel Buyers Ask

What gravel is best for a driveway in Laurel?

CR-6 is the standard choice for a Maryland driveway base because it compacts into a hard, binding surface. Top it with #57 stone or 3/4 inch crushed stone if you want a cleaner, looser wearing course. On wet clay, excavate deeper and compact in lifts so the base does not rut.

How much material will my project need?

Measure the length, width and depth, then use the calculator to turn them into cubic yards. For a paver patio, figure a thick layer of compacted base plus a thin layer of bedding sand. Enter those numbers in the product calculator and it returns the tonnage to order.

Order Your Patio Materials in Laurel

Start with the quantity calculator on the product page, then order the base, bedding and joint material your patio needs. Maryland Rock Supply delivers CR-6, sand, stone and soil across Laurel and Prince George's County. Set your depth and yardage, and place the order.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Laurel, MD

What gravel is best for a driveway in Laurel?

CR-6 is the standard choice for a Maryland driveway base because it compacts into a hard, binding surface. Top it with #57 stone or 3/4 inch crushed stone if you want a cleaner, looser wearing course. On wet clay, excavate deeper and compact in lifts so the base does not rut.

How much material will my project need?

Measure the length, width and depth, then use the calculator to turn them into cubic yards. For a paver patio, figure a thick layer of compacted base plus a thin layer of bedding sand. Enter those numbers in the product calculator and it returns the tonnage to order.

What happens if the weather turns?

We would rather move a delivery than tear up your ground. If the site is too wet for the truck on the day, we will call you and rebook. Tell us in advance about any part of the approach that does not drain and we will plan around it.