Skip to main content
FREE Delivery!|(301) 719-3485

Anne Arundel County, Maryland ยท Free Delivery

Large River Rock, Stone and Soil Delivery in Crownsville, MD

Free delivery to Crownsville on every order, with loads arriving in as fast as 2 business days.

Delivering to Crownsville, MD

Free delivery on every order.

  • Free delivery to Crownsville
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Crownsville

Crushed gravel and base materials that compact under tires.

CR-6

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Crownsville

Rock & Stone delivered to Crownsville

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Crownsville

Decorative delivered to Crownsville

Rounded stone for beds, borders and water features.

Sand delivered to Crownsville

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Crownsville

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Crownsville

How delivery to Crownsville works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Crownsville.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Crownsville addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Maryland Rock Supply handles gravel and aggregate delivery in Crownsville, MD, and the ground here shapes what you should order. The Western Shore Coastal Plain is unconsolidated sand, silt, clay and gravel, not bedrock. Top Soil on higher ground drains well; low spots hold clay and stay wet. That is why CR-6, a compacting blend of crushed stone down to dust, is the base material most Crownsville drives are built on.

Materials for Crownsville Projects

Coarse stone for slopes, swales and bank protection comes first on many Crownsville jobs. Start with the biggest stone and work down to the fines.

  • RipRap armors shorelines, stream banks, culvert outlets and slopes against wave action and storm runoff. It is the first line of defense where water hits ground.
  • #4 Crushed Stone goes into heavy drainage, construction entrances and trench bottoms, and it works as a coarse underlayer below finer stone.
  • #57 Stone is washed stone for drainage, French drains, driveway topping and concrete aggregate. Water moves through it instead of sitting on top.
  • CR-6 is the Maryland base material for driveways, parking pads, shed bases and paver sub-base. It binds and compacts into a firm, stable surface.
  • Screenings, which most Maryland yards call stone dust, beds pavers, flagstone and patios and finishes fine paths.

For decorative and softer ground, Large River Rock builds dry creek beds and handles heavier erosion work. River Rock suits borders and beds, and 3/8" Natural Pea Gravel covers walkways, patios and play areas.

Ground and Conditions in Crownsville

Base, driveway and paver work runs spring through late fall here, with only short winter stoppages for frozen ground. Low sites near the shore can stay too wet to compact after storms, so timing matters as much as material.

Winters are milder than inland, but repeated freeze-thaw still heaves and ruts a thin base, most of all over wet clay. Frost depth is set by each county, and Anne Arundel uses 30 inches. Build a base deep enough to ride through that cycle.

Summer thunderstorms, nor'easters and tropical storm rain soak the ground, and low, flat land near the Bay and tidal rivers sheds water slowly. Within 1,000 feet of tidal water, Critical Area rules limit lot coverage, and gravel and stone surfaces count toward it. Plan your footprint before you order.

Waves and storm tides wear away shorelines and bluffs, and runoff cuts gullies across sandy slopes. That is where coarse stone earns its place: rip rap on exposed banks, #4 stone in trench bottoms, and #57 stone in the drainage runs that carry water away from the house.

Delivery to Crownsville and the Surrounding Area

Order online and choose your quantity by the ton or the cubic yard. If you are unsure, measure the area and depth, then let the yard help you convert. Bulk delivery to a Crownsville site is straightforward once the truck can reach the drop point.

We cover Crownsville and Anne Arundel County, including Glen Burnie, Severn, Odenton, Annapolis and Severna Park. Lead time depends on material and route, so confirm your window when you order.

What stone should I use for drainage in Crownsville?

Start with #57 stone for French drains, downspout runs and general drainage, since it is washed and lets water pass. Use #4 crushed stone for heavy drainage, trench bottoms and construction entrances. For shorelines, swales and steep banks, rip rap is the right call. Screenings and CR-6 are for bedding and base, not for open drainage.

What should I have ready when the truck arrives?

Clear the drop area and mark any sprinkler lines, wires or soft spots the driver should avoid. Have your base or bed prepped so the material can go straight down. If the ground is saturated after a storm, tell us before the run, because a loaded truck can rut wet clay and low shore-side lots.

Order Gravel, Stone and Soil for Your Crownsville Project

Maryland Rock Supply delivers bulk gravel, stone and soil across Crownsville and Anne Arundel County. Whether you are armoring a bank, rebuilding a drive or bedding a patio, we stock the sizes that fit this ground. Order online and we will get your material out to the site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Crownsville, MD

What stone should I use for drainage in Crownsville?

Start with #57 stone for French drains, downspout runs and general drainage, since it is washed and lets water pass. Use #4 crushed stone for heavy drainage, trench bottoms and construction entrances. For shorelines, swales and steep banks, rip rap is the right call. Screenings and CR-6 are for bedding and base, not for open drainage.

What should I have ready when the truck arrives?

Clear the drop area and mark any sprinkler lines, wires or soft spots the driver should avoid. Have your base or bed prepped so the material can go straight down. If the ground is saturated after a storm, tell us before the run, because a loaded truck can rut wet clay and low shore-side lots.

Do you deliver outside Crownsville itself?

Yes. We deliver across Maryland, and the surrounding towns and rural addresses around Crownsville are covered the same way as addresses in town. If you are not sure whether your address is reachable, send it over and we will confirm before you order.