Bulk Gravel Delivery to Pasadena, MD

Maryland Rock Supply stocks gravel and aggregate delivery in Pasadena, MD, from CR-6 base to bedding sand and decorative stone. This part of Anne Arundel County sits on sand, silt, clay and gravel layers, so the material under your pavers matters as much as the pavers.

Order what the job calls for and set the depth right the first time.

Materials for Pasadena Projects

Patios, walkways and flatwork stay level only when the bedding under them is right. In Pasadena, most paver and flagstone jobs start with a compacted CR-6 base, then a bedding layer of stone dust, which local yards call screenings.

CR-6 is the standard Maryland base material here. It is a compacting blend of crushed stone down to dust, and it locks up hard under a plate compactor. Use it for driveways, parking pads, shed bases and paver sub-base. It is specified by name on most Anne Arundel County site plans, so crews order it by that name.

Above the base, the bedding layer is what sets your pavers flat. Screenings give you a fine, firm bed that levels easily and drains. Screenings also work for flagstone bedding and fine path surfacing.

Concrete sand, sold as washed sand, is the other common bedding choice. It beds and levels under pavers and slabs and mixes into concrete. Washed Sand compacts cleanly and stays level under foot traffic.

Around the edges and joints, finer stone fills the gaps. #8 Crushed Stone sweeps into paver joints, and #89 Crushed Stone handles tight bedding and small joints.

For drainage behind a retaining wall or under a patio edge, #57 Stone is the go-to washed stone. It moves water and will not hold fines.

Ground and Conditions in Pasadena

Most failed patios here fail the same way: the base was too thin, and the first hard freeze heaved it. A paver patio wants a compacted base deep enough to bridge the soft spots underneath, not just enough to hide them.

The ground under Pasadena runs from well drained Top Soil on higher lots to slow-draining clay in the low spots. Sandy ground compacts fast. Clay holds water, and a thin base over wet clay ruts and shifts first.

Summer thunderstorms and nor'easters soak this ground, and low, flat land near the Bay and tidal rivers sheds water slowly. That is why a drainage layer of #57 stone or drain rock belongs under the base on wet sites.

Frost depth in Anne Arundel County is set at 30 inches, so footings and base depths follow that number. Winters are milder than inland Maryland, but repeated freeze-thaw still works on a shallow base.

Base, driveway and paver work runs spring through late fall. Low sites near the shore can stay too wet to compact after a storm, so plan the pour or the pavers around a dry stretch.

Delivery to Pasadena and the Surrounding Area

Order online and pick the material you need by the ton or by the cubic yard. Bulk material is sold by weight, so a ton of CR-6 covers less area than a ton of sand. Know which unit you are buying before you compare.

To estimate quantity, multiply your area by the depth you want, then convert to tons using the material's weight per cubic yard. Deeper bases need more material, and a patio base is the last place to cut the number.

Bulk delivery to a Pasadena site drops the load where the truck can reach, so point out your driveway or staging area when you order. We also deliver to Glen Burnie, Severn, Odenton, Annapolis and Severna Park in Anne Arundel County.

Size Your Load Before You Order

Set your area and depth, then let the calculator convert it to tons or yards. That number tells you exactly how much CR-6, screenings or sand to order for the base and bedding. Maryland Rock Supply delivers bulk material across Pasadena and Anne Arundel County, so place your order online when your numbers are ready.